TVRemoteX

TVRemoteX compatibility and pairing matrix

Compare TVRemoteX pairing routes and feature availability for Samsung, LG, Roku, Google TV, Fire TV, Apple TV, Sony and more.

Quick answer

For compatible models using TVRemoteX, keep the iPhone and TV on the same trusted home network. This route normally uses a TV-side remote-control switch or an approval prompt rather than a reusable PIN. Follow only the prompt that appears immediately after you connect. No all-model promise. Confirm the TV operating system and the manual for the exact model.

Reviewed byBiHai Song

TVRemoteX developer and guide reviewer

TVRemoteX interface used for discovery, pairing and control
TVRemoteX interface used for discovery, pairing and control

Applicable scope

Compatible models using TVRemoteX that expose a supported local-control service. Available features vary by model and software version.

Brands and product families

SamsungLGRokuAndroid TVGoogle TVFire TVApple TVSonyHisenseTCLPhilipsPanasonicVIZIOSharpToshibaXiaomiNVIDIA SHIELDonn.Chromecast

Verification record

Connection scope
TVRemoteX
Released app version
This guide is checked against TVRemoteX 2.2.0 on the App Store.
Relevant references
13 linked manufacturer, platform or developer reference(s)
Exact-model boundary
No all-model promise. Confirm the TV operating system and the manual for the exact model.
Page reviewed

Support still depends on the television model, operating system, firmware, region, network and power state.

How TVRemoteX verifies this guide →

Connection steps

1

Confirm the TV platform first

Open the TV's About, Support or System information screen and note the operating system or model. Multi-platform brands such as Hisense, TCL, Toshiba, Philips, Sony and Xiaomi can use different control routes.

2

Put both devices on the same local network

Connect the iPhone and TV to the same home router. Do not use guest Wi-Fi, a VPN that captures local traffic, or router client isolation while pairing.

3

Allow iPhone Local Network access

When iOS asks, choose Allow. If it was denied, open Settings > Privacy & Security > Local Network > TVRemoteX, enable TVRemoteX, return to the app and scan again.

4

Keep the TV awake, then select it in TVRemoteX

Leave the TV on its Home screen, open TVRemoteX, start discovery and choose the matching device name. Do not approve a request you did not initiate.

5

Verify control before relying on advanced features

Test Home, Back and one volume command first. Keyboard, app launch, wake and casting are separate capabilities and may not be exposed by the selected route.

Optional technical detailsProtocol names and software-generation differences are kept here for advanced troubleshooting. Most people can follow the connection steps above without using this section.

Differences by model and software

Menu names and feature availability can vary by model, region and software version.

Model / software 1Native manufacturer routes

Depending on the model and software, the TV may show an approval prompt or PIN.

Samsung, LG, Sony, VIDAA, VIZIO, Philips, Panasonic, Sharp and Toshiba differ
Model / software 2Licensed TV platforms

The brand ships multiple operating systems; choose the platform-specific route.

Follow Roku, Fire TV or Android/Google TV regardless of bezel brand
Model / software 3Cast receivers

Cast receiver route only; no D-pad remote is claimed.

Media route does not imply full remote-control capability

TVRemoteX compatibility and pairing matrix

This summary covers user-visible TVRemoteX compatibility. It is not a promise that every model, firmware, region or power state exposes every command.

Model / softwareRemote navigationKeyboard inputApp launchingPower / wakePhoto / video cast
How to control a Samsung TV from iPhoneSamsung Tizen / legacy Samsung Smart TVAvailableVaries by model / connectionVaries by model / connectionVaries by model / connectionVaries by model / connection
How to pair an iPhone remote with LG webOSLG webOS / LG NetCastAvailableVaries by model / connectionVaries by model / connectionVaries by model / connectionVaries by model / connection
Roku not found on iPhone: network access fixRoku OS / Roku TV / Roku playerAvailableVaries by model / connectionAvailableVaries by model / connectionVaries by model / connection
Android TV and Google TV pairing code guideAndroid TV / Google TV / Android TV Remote ServiceAvailableVaries by model / connectionVaries by model / connectionVaries by model / connectionVaries by model / connection
How to connect TVRemoteX to Fire TVFire OS / Fire TV ADBAvailableVaries by model / connectionVaries by model / connectionVaries by model / connectionUnavailable
How to pair an iPhone remote with Apple TVtvOS / Apple TV Media Remote ProtocolAvailableVaries by model / connectionVaries by model / connectionVaries by model / connectionAvailable
Sony BRAVIA remote pairing: PIN vs PSKSony BRAVIA Professional Display IP control / Sony Android or Google TVVaries by model / connectionVaries by model / connectionVaries by model / connectionVaries by model / connectionVaries by model / connection
How to pair a Hisense VIDAA TV remoteHisense VIDAAAvailableUnavailableVaries by model / connectionVaries by model / connectionVaries by model / connection
Pair VIZIO SmartCast with a four-digit codeVIZIO SmartCastAvailableUnavailableVaries by model / connectionVaries by model / connectionVaries by model / connection
Philips TV remote pairing with JointSpaceSelected JointSpace-capable Philips models / Philips Android or Google TVVaries by model / connectionVaries by model / connectionVaries by model / connectionVaries by model / connectionVaries by model / connection
How to pair a Panasonic VIERA remote appSelected Panasonic VIERA network remote routesVaries by model / connectionUnavailableVaries by model / connectionVaries by model / connectionVaries by model / connection
Sharp AQUOS IP Control login and setupDocumented Sharp AQUOS IP Control family (8M-B70AU reference)Varies by model / connectionUnavailableUnavailableVaries by model / connectionUnavailable
Toshiba TV remote setup by operating systemToshiba Smart Center / Fire TV / Android TV / VIDAAVaries by model / connectionUnavailableVaries by model / connectionVaries by model / connectionVaries by model / connection

Symptoms and fixes

What you seeLikely causeWhat to do
The brand is found but pairing instructions look wrongThat brand uses another operating system, such as Roku TV, Fire TV, Android/Google TV or VIDAA.Check About/System information and follow the operating-system guide instead of the logo on the bezel.
The TV does not appearLocal Network permission, guest Wi-Fi, VPN or client isolation is blocking discovery.Enable iOS Local Network access, use the same non-guest LAN, pause the VPN and rescan with the TV awake.
Connected, but buttons do nothingThe TV accepted discovery but blocks third-party control, selected a limited route, or is showing a protected screen.Check the platform's network-control setting, return to Home and test basic navigation before advanced commands.
Power off works but wake does notDeep standby disabled network wake, the TV lost Wi-Fi, or this connection method does not support wake.If your model offers a network or mobile-device wake setting, enable it. Otherwise turn on the TV with its physical remote and reconnect.
Keyboard input is unavailableThe active route does not expose text input or the TV is not focused in an editable field.Open a search or sign-in text field on the TV, then retry. Use the on-TV keyboard when the route remains unavailable.
An app shortcut is missing or will not openThe TV did not report that app, the app is not installed, or its identifier differs by model or region.Install and open the app once on the TV, refresh the app list, and do not assume a shortcut exists on every region.
A photo works but a video does notThe receiver cannot fetch or decode that media format, or protected streaming content blocks redistribution.Try a common local file on the same LAN. Use the streaming app's own AirPlay/Cast control for protected services.

Available features

This summary covers user-visible TVRemoteX compatibility. It is not a promise that every model, firmware, region or power state exposes every command.

Remote navigationVaries by model / connection
Keyboard inputVaries by model / connection
App launchingVaries by model / connection
Power / wakeVaries by model / connection
Photo / video castVaries by model / connection

Manufacturer help

  1. 01
  2. 02
  3. 03
  4. 04
  5. 05
  6. 06
  7. 07
  8. 08
  9. 09
  10. 10
  11. 11
  12. 12
  13. 13