Android TV / Google TV / Android TV Remote Service
Google TV and Android TV remote on iPhone: pairing code
Connect the iPhone and compatible Android TV or Google TV to the same home network. In TVRemoteX, select the television and follow the pairing instructions for its detected service, entering the current on-screen code when requested. Available controls depend on the TV software and connection method. Exact support still depends on the TV model and software version; check the manual for your model if a step does not match.
Download TVRemoteX
Applicable scope
Brands and product families
Use another guide when the TV runs
Connection steps
Keep the TV awake, then select it in TVRemoteX
Leave the TV on its Home screen, open TVRemoteX, start discovery and choose the matching device name. Do not approve a request you did not initiate.
Enter the current TV pairing code
Use the code displayed by the Android TV Remote Service when TVRemoteX asks for it. If the app and TV show an additional pairing step, follow those current prompts. Do not enable wireless debugging unless the selected connection route specifically requires it.
Verify control before relying on advanced features
Test Home, Back and one volume command first. Keyboard, app launch, wake and casting are separate capabilities and may not be exposed by the selected route.
TV settings
Menu names and feature availability can vary by model, region and software version.
No developer setting: select the TV and use the code displayed on screenGoogleDeveloper options > Wireless debugging > Pair device with pairing codeAndroid DevelopersOptional technical detailsProtocol names and software-generation differences are kept here for advanced troubleshooting. Most people can follow the connection steps above without using this section.
Differences by model and software
Menu names and feature availability can vary by model, region and software version.
Android TV remote-service code; code format can vary by implementation.
Compatible models normally show a pairing code on the TVAndroid TV remote-service code; code format can vary by implementation.
The code presentation can differ by model and softwareSome devices may show an additional pairing step; follow the current on-screen instructions.
Some devices show extra setup prompts; follow the app and TV instructionsSymptoms and fixes
| What you see | Likely cause | What to do |
|---|---|---|
| The TV does not appear | Local Network permission, guest Wi-Fi, VPN or client isolation is blocking discovery. | Enable iOS Local Network access, use the same non-guest LAN, pause the VPN and rescan with the TV awake. |
| The pairing code is rejected | The code expired, belongs to an earlier session or was entered incorrectly. | Close the old dialog, start pairing again and follow the current prompts exactly. |
| Connected, but buttons do nothing | The TV accepted discovery but blocks third-party control, selected a limited route, or is showing a protected screen. | Check the platform's network-control setting, return to Home and test basic navigation before advanced commands. |
| The brand is found but pairing instructions look wrong | That brand uses another operating system, such as Roku TV, Fire TV, Android/Google TV or VIDAA. | Check About/System information and follow the operating-system guide instead of the logo on the bezel. |
| Power off works but wake does not | Deep standby disabled network wake, the TV lost Wi-Fi, or this connection method does not support wake. | If your model offers a network or mobile-device wake setting, enable it. Otherwise turn on the TV with its physical remote and reconnect. |
| Keyboard input is unavailable | The active route does not expose text input or the TV is not focused in an editable field. | Open a search or sign-in text field on the TV, then retry. Use the on-TV keyboard when the route remains unavailable. |
| An app shortcut is missing or will not open | The TV did not report that app, the app is not installed, or its identifier differs by model or region. | Install and open the app once on the TV, refresh the app list, and do not assume a shortcut exists on every region. |
| The documented setting is missing | Menu structure differs by model year, region or firmware, or the model does not expose local control. | Use the TV's built-in search or its exact model manual. Do not enable a similarly named setting unless the manual says it controls mobile/IP access. |
Manufacturer help
- 01
- 02Android DevelopersPair a device over Wi-Fi with a pairing code
- 03
Did this guide help?
Thanks for your feedback.